Table Of Content
SS 410 plates are very useful and beneficial to many industries. The many ingredients that they have in them make the products more fit and hard. The main composition of stainless steel is a most strong and perfect metal that can be used for complex applications throughout. The polish that SS 410 Plates and SS 410 sheets have is commendable. SS 410 coils have endured finish making the product very useful
Composition of SS 410 plates and sheets and coils:-
Why go for SS 410S plates and sheets and coils?
• SS 410 and SS 410S products have all the best features of good yield and better tensile capacity.
• They are highly ductile and pliable.
• They reach their maximum hardness within a short time, making most applications successful.
• The content of manganese makes them work with great temperatures.
• The element of sulphur makes them stand fit against oxidizing agents.
• Chromium reduces the accumulation of any precipitate layer within.
• Such products have a long shelf life and have a good guarantee.
• They withstand corrosion and abrasion too.
• Long hours of use do not reduce them.
• They are flexible to use in a wide range of temperatures.
SS 410 plates and sheets are compatible with many machines conveniently. SS 410S plates and coils have more amount of sulphur which is denoted by the letter S. This makes them very sturdy. The industries needing these products are as below-
• Pharmaceutical industry
• Food processing plants
• Nuclear power plants
• Water supply management plants
• Electricity divisions
When heated, 410 Sheets, Plates, Coils becomes essentially non-magnetic. Stainless Steel 410 Plates is a nickel-conserving austenitic chromium-nickel-manganese stainless steel. SS 410 Coils is a less expensive alternative to traditional Cr – Ni stainless steels, with nickel substituted by manganese and nitrogen additives. Stainless Steel 410 Slatting Coils is not thermally hardenable, although it can be cold treated to high tensile strengths. The corrosion resistance of Stainless Steel 410 Perforated Coils ranges from mild to moderate.
The robustness of such products is proven in every sphere of work. SS 410 Sheets have physical crafting as per standards only. The dimensions may vary from the customer’s point of view. Many industries magnificently use the value of SS 410S plates and coils. The rates for such products are quite inexpensive.
|Specifications||ASTM A240, ASME SA240|
|Dimensional specification||JIS, AISI, ASTM, GB, DIN, EN, etc|
|Width||1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc|
|Length||2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc/td>|
|Thickness||0.3 mm to 120 mm|
|Form||Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.|
|Surface Finishing||Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.|
|Value Added Services||Cutting, Beveling, Polishing, Threading, Destructive, Non Destructive, Ultrasonic Testing|
|Outside Finish||Finish as per customer Requirements|
|Delivery Condition||Annealed and Pickled, Polished, Bright Annealed, Cold Drawn|
|Packing||Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests|
|Specials||Sizes and Specifications other than above can be on request|
|SS 410||11.50 – 13.50||0.0 – 1.50||0.0 – 1.00||0.0 – 0.75||0.08 – 0.15||0.0 – 0.04||0.0 – 0.02||Balance|
|SS 410S||0.08||1.00||1.00 max||11.50–13.50||0.6 max||0.040||0.030||–||–|
|Density||Tensile Strength||Yield Strength (0.2%Offset)||Elongation||Hardness|
|7.8 g/cm3||psi – 64,400, MPa – 444||psi – 42,000, MPa – 290||33 %||Rockwell B (HR B)- 75 / Brinell (HB)- 65|
Chile, Bhutan, Hong Kong, Romania, Sweden, France, Tunisia, Netherlands, Bahrain, Kenya, Singapore, Colombia, Greece, Pakistan, Philippines, Angola, Lithuania, Portugal, Bangladesh, Czech Republic, Brazil, Poland, Estonia, Oman, Yemen, Malaysia, Kuwait, Serbia, Iran, Norway, South Korea, Ghana, Denmark, New Zealand, Afghanistan, Russia, Italy, Nigeria, Iran, Ukraine, Nigeria, Vietnam, Poland, Australia, Mexico, Croatia, Indonesia, Costa Rica, United Kingdom, Peru, Chile, Egypt, Algeria, Finland, Saudi Arabia, Jordan, Venezuela, Sri Lanka, Iraq, Taiwan, Canada, Argentina, Slovakia, Hungary, Israel, Azerbaijan, Switzerland, Belarus, Belgium, Ecuador, Turkey, Kazakhstan, Qatar, Lebanon, South Africa, Morocco, Mongolia, Spain, Libya, Bolivia, Japan, Mexico, United States, Thailand, United Arab Emirates, Austria, Bulgaria, China, Trinidad & Tobago, Gabon,