Table Of Content
The low-carbon variant of stainless steel, known as SS 310S, has unique qualities that allow it to be applied in high-temperature industrial applications. The alloy contains numerous elements, including chromium, nickel, and carbon components. The most incredible metal to utilise in various high-temperature conditions is stainless steel 310H. Contrarily, the alloying elements in austenitic stainless steel 310/310S/310H sheet plates provide it with multiple qualities.
SS 310S sheets are more demanding than any other alloyed sheets. They can be dented and forged to form any required tool. SS 310S plates have a diameter as perfect as possible, easily assembled into many gadgets. SS 310S coils have an elongation latitude that is quite impressive. On similar lines, SS 310 sheets have the highest malleable ability owing to the strength extended by the stainless steel content. SS 310 plates and coils have flexibility with apprehensive attributes, making them fit for many pressurised applications.
SS 310H sheets have a fighting capacity against many harmful agents. SS 310H plates have edges and curves well-crafted for a smooth finish and texture. Their make coils have good bounce and tension resistant ability making them fit accurately in the perforations of the machines. These products’ capabilities and peculiarities are scarce and very apt for prolonged use with devices. Destructive environmental factors do not reduce them, which is a much-added benefit.
A few qualities in the sheets and plates include stability at high temperatures, excellent flexibility, durability, and corrosion resistance. In pulp and paper, oil and gas, pharmaceuticals, petrochemicals, sheets and plates are employed in this fashion. When moist corrodents are present in an application environment, and the temperature range is lower than what else is generally referred to as “high temperature” service, grade 310S is applied. Compared to 310H, 310S has less carbon, which lessens its high-temperature strength.
The company provides various SS 310S plates: hot rolled plates, perforated plates, Cold Rolled plates and polished Plates. These plates contain chromium and nickel content, which shows corrosion resistance and excellent oxidation immunity. The company manufacture these products, which are tough and highly resistant to corrosion. These plates, sheets and coils have surfaced in different forms like coated, hot-formed and cold formed. SS 310 coils reduce the environmental impact and make it recyclable. Using these sheets are developed into flat products or long products. These products are used in radiant tubes, tube hangers for petroleum refining, kilns and steam boiler.
|Specifications||ASTM A240, ASME SA240|
|Dimensional specification||JIS, AISI, ASTM, GB, DIN, EN, etc|
|Width||1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc|
|Length||2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc/td>|
|Thickness||0.3 mm to 120 mm|
|Form||Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.|
|Surface Finishing||Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.|
|Value Added Services||Cutting, Beveling, Polishing, Threading, Destructive, Non Destructive, Ultrasonic Testing|
|Outside Finish||Finish as per customer Requirements|
|Delivery Condition||Annealed and Pickled, Polished, Bright Annealed, Cold Drawn|
|Packing||Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests|
|Specials||Sizes and Specifications other than above can be on request|
|SS 310||1.4841||S31000||SUS 310||310S24||20Ch25N20S2||–||X15CrNi25-20|
|SS 310S||1.4845||S31008||SUS 310S||310S16||20Ch23N18||–||X8CrNi25-21|
|SS 310||0.015 max||2.0 max||0.15 max||0.020 max||0.015 max||24 – 26||0.10 max||19 – 21||54.7 min|
|SS 310S||0.08 max||2.0 max||1.00 max||0.045 max||0.030 max||24 – 26||0.75 max||19 – 21||53.095 min|
|SS 310H||0.04 – 0.1||2.0 max||1.00 max||0.045 max||0.030 max||24 – 26||–||19 – 21||53.885 min|
|Density||Melting Point||Tensile Strength||Yield Strength (0.2%Offset)||Elongation|
|8.0 g/cm3||1400 °C (2550 °F)||Psi – 75000 , MPa – 515||Psi – 30000 , MPa – 205||35 %|