FE 500 TMT Bars. These TMT bars are widely used for construction purposes. These Bars are highly corrosion-resistant and have higher load-bearing capacity. There are high-strength and durable Bars for our customers. FE 500 TMT Bar required sizes and dimensions of these TMT Bars with several specifications. TMT Bars are widely applied in RCC construction due to their higher uniform elongation property. There is prompt and certified material for these Bars to gain Structural rigidity and corrosion-resisting properties.
FE 500 TMT Bars are utilized in the RCC construction of buildings, bridges, and other structures. It is more susceptible to utilize in earthquake zone as it absorbs extra energy.
It prevents fires and corrosion with balanced strength and flexibility due to the low Carbon present in it. These Bars easily Bend and reveals high strength and function as stress concentrators. The most selective properties of FE 500 Bars are outstanding yield, tensile strength, and excellent weldability.
FE 500D TMT Bars are more flexible, robust, and fire-resistant, with enhanced qualities of FE 500 grade. Moreover, due to the low sulfur amount of phosphorous, it is widely accepted as the best construction choice, like FE 500.
FE 415 TMT Bars are suitable for seismic zone utilization, where these bars demonstrate an excellent combination of tensile strength and flexibility for the proper structure. It is empowered to load and easily accomplish tensile and yield quality than FE 500. It is more weldable and influences the overall functioning of TMT Bars with fewer expenses. It provides strength to twisted conditions and rust and corrosion protection. It is mainly selected for its capability to withstand vibrations of remarkable extents.
Fe 415 steel bars’ flexibility allows them to resist such loads. Therefore, achieving and maintaining the yield quality and flexibility in the case of TMT grades like Fe 500 with both the TMT process alone is challenging. In addition, specific microalloying precipitation solidifying components are required. It is essential to balance the small-scale alloying process with QST. Extreme differences between the two can cause essential qualities like yield strength and flexibility to be sacrificed.
|8mm, 10mm, 12mm, 16mm, 20mm, 25mm and 32mm
|FE 500 / FE 500D/ FE 415
|Stainless Steel / Mild Steel