Table Of Content
The IS 2062 E250BR Sheets also show various characteristics like corrosion resistance and oxidation in temperature reduction. These plates have many characteristics, such as high mechanical strength, good tensile strength and high-temperature elastic limit. IS 2062 E250BR inserts are flexible, tough and tough. These coils exhibit high strength at high temperatures.
| Thickness | 5mm-200mm |
| Width | 900-2500mm or 1000,1050,1250,1500,1800,2000mm |
| Length | 2-12m or as customers’ special requirements; |
| Standard | EN 10025-2:2004 |
| Grade | IS 2062 E250BR |
| Materials | High Strength Mild Steel/ Carbon Steel / Galvanised |
| Grade | C | Mn | S | P | Si | Carbon Equivalent(CE),Max |
| IS2062 | 0.22 | 1.50 | 0.045 | 0.045 | 0.40 | 0.41 |
| Grade | Yield Strength N/mm2 | Tensile Strength N/mm2 | Elongation (%) | ||
|---|---|---|---|---|---|
| <20mm | 20mm-40mm | >40mm | |||
| IS2062 E250BR | 250 | 240 | 230 | 410 | 23 |
| Grade | Quality | C | Mn | S | P | Si | C.E. Value | Mode of Deoxidation |
| E250 | A | 0.23 max | 1.50 max | 0.045 max | 0.045 max | 0.40 max | 0.42 max | Semi Killed / Killed |
| BR, BO | 0.22 max | 1.50 max | 0.045 max | 0.045 max | 0.40 max | 0.41 max | Semi Killed / Killed | |
| C | 0.20 max | 1.50 max | 0.040 max | 0.040 max | 0.40 max | 0.39 max | Killed |
| Element | Tensile StrengthMin, Mpa | Yield Stress (<20 mm) | Yield Stress (20-40 mm) | Yield Stress (>40 mm) | % Elongation at gauge length 5.65 √Ѕo | Bend Test (min) |
| Carbon Steel IS 2062 | 410 | 250 | 240 | 230 | 23 min | 3t* (*t is 3 times thickness) |
IS 2062 E250BR plates go into railway wagons, power plant structures, and shipbuilding hulls, where tensile strength matters more than corrosion resistance. Construction firms specify the grade for structural steel work, while the pulp and paper, fertiliser, and petrochemical industries use it for process equipment frames. Its combination of strength and weldability also suits pharmaceutical and food processing plant fabrication.
Yield strength reaches 250 N/mm² for thickness below 20mm, drops to 240 N/mm² between 20mm and 40mm, and settles at 230 N/mm² above 40mm. Minimum tensile strength holds at 410 N/mm² across all thicknesses, with elongation at 23% minimum over a 5.65√ So gauge length.
The carbon content remains at a maximum of 0.22%, with manganese limited to 1.50% and silicon to 0.40%. Sulphur and phosphorus are both under 0.045%, and the carbon equivalent value is capped at 0.41, a limit that keeps weldability in the range of normal fabrication work.
Navgraha Steel & Engg Company stocks and supplies IS 2062 E250BR sheets, plates, and coils from its Mumbai base. The company holds ISO 9001:2008 certification, and buyers can place orders for cut-to-size material or full plate and coil quantities.
PRODUCTS
Navgraha Steel & Engineering Company
Krishvi Escape, No. A208, 2ND Floor,
A Wing, Sitaram Poddar Marg,
Near Vinay Health Home, Fanaswadi, Bhuleshwar, Mumbai- 400002