Table Of Content
High Strength Steel / MS /CS / Galvanised Iron / Alloy Steel Fasteners with various material grades. Fasteners are hardware mechanisms to mutually affix or join two or more objects or parts mechanically. High strength Fasteners, Which have multiple bolts, nuts, washers, studs, etc., for various applications.
What are High Strength Steel Fasteners?
High Strength Steel is an excellent tensile steel that makes lightweight structures possible with simple welding. High-strength fasteners are therefore preferred in the enormous scope of applications. It is further increased with strength identified as Advanced and Ultra-high strength steel and used in:
MS Fasteners:
MS is Mild Steel with excellent qualities of a wide thermal range due to higher resistance to heat corrosion. These fasteners are accessed with higher strength and flexibility due to mild or less carbon. Consequently, it supports accuracy and formability in various shapes with ease of fabrication. These fasteners are recommended for their toughness and high sarcastic ambiance helpful in the:
CS Fasteners:
CS is Carbon Steel mainly proposed for application in noncorrosive surroundings. These are higher-carbon Steel fasteners with enhanced strength. These fasteners are accepted in a wide temperature array to oppose erosive heat effects. Thus cracking power is provided against heat decomposition. These fasteners are better tough to high pressure and stress used in:
Properties of MS/CS Fasteners:
Galvanized Iron Fasteners:
Galvanized Iron is iron material coated with a zinc layer. Therefore it is enhanced to higher corrosion protection of the surface. These Galvanized Iron Fasteners have increased life with effective functioning in different surroundings. Additionally, these fasteners are known to be more defiant to pitting and rusting on the surface. These fasteners are heat efficient, performing higher strength and durability.
Alloy Steel Fasteners:
Alloy Steel is included with steel alloys with excellent alloying elements like Molybdenum, Manganese, Nickel, Chromium, Vanadium, Silicon, and Boron for strength and hardness improvement. These Alloy Steel fasteners are thus acknowledged to have superior strength and wear resistance. These are more rigid structures used in:
Bolt / Screw Size | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
Nuts Size | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
Washers Size | M3 – M56 | 3/6″ to 2″ | Custom Sizes |
Machine Screws Size | M1.6 – M12 |
Self Tapping Screw Size | No.2 – No. 14 |
Length | 3 mm to 200 mm |
Studs, Bolts, Threads | UNF, BSW, BSF, METRIC, UNC, or as required |
Threads Configuration | ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
Certification | Dual Certified As per ASTM & ASME Codes |
Dimensions | DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3 |
Threads | Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically |
Test Certificate of Bolting | as per EN 10204 / 3.1 Manufacturer Test Certificate |
Cities where we export Carbon Steel Fasteners