Table Of Content
Navgraha Steel &Engg Company offer high quality SS 301 Strip Coil. The strip coil is used in super-high-strength of spring applications.Stainless steel 301 is a reform of stainless steel grade 304. The product exhibits corrosion resistance similar to type 302 and 304 grades. 301 type of strip coil reaches its most optimal resistance to corrosion in the cold worked. The grade 302 and 304 is superior in the hard conditions because the higher elongation facilitates fabrication. SS 301 strip Coil is ductile.
The product has austenitic chromium and nickel stainless steel. It has high tensile strength and excellent corrosion resistance. Also, it contains flawless finishing. Chromium nickel of these 301 austenitic stainless steel can manage high strengths and ductility by cold working while it is tough to enable by heat treatment. It is usually formed, but it required intermediate anneals in severe forming or multiple operations because of its high hardening rate. Therefore, it is fit for structural application for its hardness and strength.
The modification of the Stainless steel 301 strip coil has high strength levels, which maintain its adaptability. The adaptability of the product maintains with or without stress relieving.
Features of the material SS 301:
Properties of SS 301 strip Coil:
Industries and application utilized SS 301 strip Coil:
The product has a wide-ranging of Stainless steel 301 strip coil. The coils exist in hot rolled stainless steel 301 strip coil and cold-rolled stainless steel 301 strip coil. The strip coil are manufactured according to national as well as international standards. Nonmagnetic strip coils are highly demanded in the food industry, cement, gas, chemical, pharmaceutical, etc. It is also used in IT components, industrial springs and aircraft connectors.
Specifications | ASTM A240 / ASME SA240, BS EN 10088-2, en 10028-7, IS 6911 |
Dimension Standard | MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc |
International Standard | ASTM A480, ASTM A959, ASME IID, EN ISO 9445, EN ISO 18286, EN 10051, EN 10088-1, ISO 15510 |
Thickness | 0.02 mm to 3.50 mm |
Width | Up to 1580mm |
Finish | 2B, Bright Annelaled (BA), Hot Rolled (HR), 2D, 2E etc. |
STANDARD | WERKSTOFF NR. | UNS | JIS |
SS 301 | 1.4310 | S30100 | SUS 301 |
ELEMENT | C | Mn | P | S | Si | Cr | Ni | N |
SS 301 | 0.150 max | 2.00 max | 0.045 max | 0.030 max | 1.00 | 16.00 – 18.00 | 6.00 – 8.00 | 0.10 |
Grade/Temper | Tensile Strength
ksi (min.) |
Yield Strength 0.2%
ksi (min.) |
Elongation -% in 50 mm (min.) |
301 1/4 | 125 | 75 | 25 |
301 1/2 | 150 | 110 | 18 |
301 Full Hard | 185 | 140 | 9 |
PRODUCTS