Table Of Content
Inconel 825 Strip Coil. These Strip Coils are fabricated in large factory unit with various specifications. These are available in several sizes and thicknesses with specified temperature capacity. Strip Coils are easily formable and strip structures that provide excellent functionality at corrosive conditions with extraordinary resistance with Inconel 825 grade.
Inconel 825 Strip Coils. It is availed with national quality standards and also made at global quality norms accepted. These is made with accurate dimensions, with excellent strength, and proper surface finish. It is largely accepted in acid-producing equipment and phosphoric acid Evaporators along with equipments in acid production, chemical, and pickling. It is applied at high temperatures and pressure in pressure vessels, nuclear, heat exchangers in petroleum, expansion bellows, propeller shafts.
Inconel 825 Strip Coils consists of added Molybdenum, improving pitting and aqueous corrosion opposition efficiency. At the same time, Copper impart that of sulfuric acid effect. These Strip Coils are benefited from stabilization with Titanium. These Strips are protected from local attacks such as porosity and stress corrosion cracking. It is effective against reduction due to acids like sulfuric and phosphoric acids. Thus it can be used in piping in chemical, gas, oil processing along with pollution control equipments.
These Inconel 825 Strip Coils that are featured with excellent serviceability, low maintenance, durability, and flexibility. These are known to be quickly and evenly heating Coils due to large surface area. It allows high temperatures in the cryogenic to the moderate-high range. Its mechanical properties are retained at room temperature as well as elevated ranges. Pressure vessels are applicable at high temperatures. It provides better tensile and yield strength at high-stress applications. The raw material used after testing for internal defects and assured quality levels. It saves time, and large production is possible; thus, the large stock is readily accessible.
|Specifications||ASTM B424 / ASME SB424, BS EN 10088-2, en 10028-7, IS 6911|
|Dimension Standard||MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc|
|International Standard||ASTM A480, ASTM A959, ASME IID, EN ISO 9445, EN ISO 18286, EN 10051, EN 10088-1, ISO 15510|
|Thickness||0.02 mm to 3.50 mm|
|Width||Up to 1580mm|
|Process of Manufacturing||Cold Rolled (CR)|
|Incoloy 825||2.4858||N08825||ЭП703||NFE30C20DUM||NCF 825||NA 16||NiCr21Mo||XH38BT|
|Incoloy 825||38.0 – 46.0||19.5 – 23.5||22.0 min||2.5 – 3.5||0.6 – 1.2||1.5 – 3.0||1.0 max||0.05 max||0.03 max||0.2 max||0.5 max|
|Density||Melting Point||Tensile Strength||Yield Strength (0.2%Offset)||Elongation|
|8.14 g/cm3||1400 °C (2550 °F)||Psi – 80,000 , MPa – 550||Psi – 32,000 , MPa – 220||30 %|