Table Of Content
Inconel 825 flanges These Inconel 825 Spectacle Blind Flanges help avoid stress corrosion cracking and have good weldability by all conventional processes. Inconel 825 Weld Neck Flanges plays a significant role in heat exchanger’s for chemical processing, pollution control equipment, oil well, and gas gathering pipes even in coated steel pipes where resistance to stress cracking or general corrosion is required, to a wide range of reducing or oxidizing acids. Inconel 825 Flanges also avoid pitting and crevice corrosion, as well as localised attack. Furthermore, they can tolerate both sulfuric and phosphoric acids. They can be utilized in marine applications because they can tolerate water corrosion as well. Titanium protects against hypersensitivity at the grain boundary.
Inconel 825 Flanges form an entity of pipe fittings. Pipes are used for flowing agents. They need to be foolproof. So the solution to determine the rate of such flow is reserved by our such efficient Flanges. Inconel 825 flanges work precisely when the liquid flowing in the pipe is in a single phase, which means unidirectional. Inconel 825 flanges can also be utilized for monitoring the movement of gases. While assembling in a single phase, a disc is placed between two Alloy Steel Orifice Flanges. Slight perforation is observed in the middle part or center of the product. The rest of Inconel 825 flanges is a circular plate. Inconel 825 flanges can be drilled into a machine for permanent use.
Inconel 825 flanges. The list of parameter checks on Inconel 825 flanges is made critically. Such aspects are important to prove Inconel 825 flanges compatibility, formability, sustainability, usability, and machinability. Two pipes or tubes are connected using flanges. Depending on their intended usage, they are made of various materials. One such class of flanges with exceptional resistance to both oxidizing and reducing acids are Inconel 825 flanges. They are clean to weld and have improved corrosion resistance due to fabrication. They are neither sensitive to nor susceptible to pitting by chloride.
|Specifications||ASTM B564 / ASME SB564|
|Flange size range||1/2″ (15 NB) to 48″ (1200NB) DN10~DN5000|
|Flanges Dimensions||ANSI/ ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.|
|Flanges Standard||ANSI Flanges, AWWA Flanges, ASME Flanges, BS 10 Table D Flanges, Table E Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flanges.|
|Pressure Class / Rating||Class 150 LBS, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.|
|Flange Connect Type/ Flange Face Type||Raised Face (RF), Ring Type Joint (RTJ), Large Male-Female (LMF), Flat Face (FF), Small Male-Female (SMF), Lap-Joint Face (LJF), Small Tongue, Large Tongue & Groove|
|Specialized manufacturer of||Weld Neck Ring Flanges (WNRF), Slip-On Ring Flanges (SORF), Blind Ring Flanges (BLRF), Socket Weld Ring Flanges (SWRF), Lap Joint Ring Flanges (LJRF), Ring Type Joint Flanges (RTJF), Large Diameter Flanges, Orifice Flanges|
|Test Certificates||EN 10204/3.1B|
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
|Incoloy 825||2.4858||N08825||ЭП703||NFE30C20DUM||NCF 825||NA 16||NiCr21Mo||XH38BT|
|Incoloy 825||38.0 – 46.0||19.5 – 23.5||22.0 min||2.5 – 3.5||0.6 – 1.2||1.5 – 3.0||1.0 max||0.05 max||0.03 max||0.2 max||0.5 max|
|Density||Melting Point||Tensile Strength||Yield Strength (0.2%Offset)||Elongation|
|8.14 g/cm3||1400 °C (2550 °F)||Psi – 80,000 , MPa – 550||Psi – 32,000 , MPa – 220||30 %|