Table Of Content
Inconel 718 Fasteners. provides corrosion resistance and high quality. These fasteners show resistance to heat and corrosion in extreme conditions also. For increasing yield strength with plastic deformation, forming equipment should be strong and well-powered. Inconel 718 has machining features at high temperatures. Inconel 718 alloy is joined by many typical processes. Nickel composition guarantees remarkable high tensile, creep rupture, and creep properties at high temperatures. In terms of resistance to pitting and crevice corrosion, these fasteners excel. They also exhibit excellent resistance to aqueous corrosion and stress corrosion cracking caused by chloride ions.
The chemical content of Inconel 718 provides the best resistance to many corrosive environments improved than Inconel 718 alloy. These Inconel 718 Fasteners show resistance to oxidation and reducing acids. These fasteners have resistant to stress corrosion cracking. Inconel 718 is highly resistant to phosphoric acid and sulfuric acids and attacks by crevice and pitting corrosion. Good mechanical properties are offered by our Inconel 718 Fasteners at room and elevated temperatures.
The characteristic of Inconel 718 is permission for pressure vessels used at wall temperature. These fasteners show a high level of corrosion resistance. Due to their various properties, these fasteners are used in chemical processing, pollution control, oil and gas well piping, and nuclear fuel reprocessing. It is also used in acid production and components in pickling equipment such as tanks and heating coils.
Inconel 718 Fasteners is one of the most flexible and strong fastener varieties that is widely used in numerous industrial applications. These precipitate-hardening fasteners are made with a modest margin of titanium and aluminum and chromium-nickel content that equates. These fasteners necessarily guarantee oxidization and corrosion resistance, enabling them to function well in environments with high heat and pressure. These fasteners serve as a cryogenic temperature training tool through to long-term usage at 1200 degrees Celcius. These are easily annealed and welded due to their age-hardening characteristics because they do not spontaneously harden during heating and cooling.
|Standard||ASTM B637 / ASME SB 637|
|Bolt / Screw Size||M3 – M56 | 3/6″ to 2″ | Custom Sizes|
|Nuts Size||M3 – M56 | 3/6″ to 2″ | Custom Sizes|
|Washers Size||M3 – M56 | 3/6″ to 2″ | Custom Sizes|
|Machine Screws Size||M1.6 – M12|
|Self Tapping Screw Size||No.2 – No. 14|
|Length||3 mm to 200 mm|
|Studs, Bolts, Threads||UNF, BSW, BSF, METRIC, UNC, or as required|
|Threads Configuration||ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads|
|Certification||Dual Certified As per ASTM & ASME Codes|
|Dimensions||DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3|
|Threads||Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically|
|Test Certificate of Bolting||as per EN 10204 / 3.1 Manufacturer Test Certificate|
|Inconel 718||0.08 max||0.35 max||0.35 max||0.015 max||0.30 max||–||50.00 – 55.00||17.00 – 21.00|
|Element||Density||Melting Point||Tensile Strength||Yield Strength (0.2%Offset)||Elongation|
|Inconel 718||8.2 g/cm3||1350 °C (2460 °F)||Psi – 1,35,000 , MPa – 930||Psi – 75,000 , MPa – 482||45 %|