Navgrah Steel: Steel Sheets, Plates and Coils Supplier in India

Steel Sheets, Plates and Coils Supplier in India

Navgraha Steel & Engineering Company, established in 2014, is a supplier, wholesaler, importer, exporter and stockist of stainless steel, carbon steel, duplex, and super duplex steel, and high-nickel alloy products in sheet, plate, coil, bar, wire, pipe, and fitting forms. As a steel sheets, plates and coils supplier in India, Navgrah Steel works with industrial and commercial buyers who order against defined specifications. Grade, dimension, thickness, finish and intended application each change how the material behaves in service, and a grade that performs in one environment can fail in another. This page covers the material categories we hold, the grades and standards buyers cite most often, dimensional considerations and application notes for fabrication, engineering and industrial projects.

Types of Steel Sheets, Plates and Coils We Supply

The following material families cover most enquiries: stainless steel, carbon and mild steel, alloy steel, duplex grades and nickel alloys.

Stainless Steel Sheets, Plates and Coils

Stainless steel resists corrosion through chromium content, which forms a passive oxide film on the surface. Our stainless steel sheets, plates and coils in grades 304 and 316 go into industrial equipment, fabrication work, food-processing environments and chemical duty, depending on the grade selected.

Carbon Steel and Mild Steel Sheets, Plates and Coils

Carbon and mild steel serve structural fabrication, machinery builds, general engineering and industrial equipment. Grade selection rests on four factors: strength, formability, thickness and the governing standard. As a carbon steel plate supplier, we quote against the specification you cite rather than a generic equivalent.

Alloy Steel Sheets and Plates

Alloying elements such as chromium and molybdenum raise strength and maintain mechanical properties at elevated temperatures. Alloy steel plates go into pressure equipment, industrial machinery and demanding service environments where the design documents require a specified alloy grade.

Duplex and Super Duplex Steel Plates

These grades carry a mixed austenitic and ferritic structure, which gives higher strength than standard austenitic stainless steel, together with resistance to chloride attack. Duplex steel plates suit selected chemical, marine and process applications.

Nickel Alloy Sheets, Plates and Coils

Nickel-based alloys answer specific corrosion, temperature or mechanical requirements rather than general-purpose duty. Our nickel alloy sheets and plates cover the Inconel, Monel and Hastelloy families, each specified for a different reason.

Steel Grades and Material Specifications

As a steel sheets and plates supplier, we quote on grade and standard together, since the pair fixes chemistry, mechanical properties and acceptance testing.

Stainless Steel 304 and 316

  • Grade 304 handles general corrosion service and remains the default austenitic choice for sheet and plate fabrication.
  • Grade 316 contains molybdenum, which improves resistance to pitting and chloride-induced corrosion compared with Grade 304.
  • The operating environment decides which of the two applies.

ASTM A36 and IS 2062 Steel Plates

  • ASTM A36 and IS 2062 are structural steel specifications used in fabrication and construction work.
  • Mechanical properties and acceptance requirements must be checked against the applicable specification and the grade cited on the drawing.

SA 516 Grade 60 and Grade 70 Boiler Quality Plates

  • SA 516 plates go into pressure-vessel applications where the governing code and the design conditions permit their use.
  • Toughness, plate thickness, impact testing and code requirements all carry weight at the enquiry stage.

SA 387 Alloy Steel Plates

  • SA 387 covers chromium-molybdenum plates specified for pressure-vessel service, including elevated-temperature duty.
  • The correct grade and class follow from the design requirement, not from what is available.

Inconel, Monel and Hastelloy Sheets and Plates

  • Inconel, Monel and Hastelloy are three separate nickel-alloy families with different chemistries and different service limits.
  • They aren’t interchangeable, so confirm the alloy designation and temper before the order is released.

    Hot-Rolled vs Cold-Rolled Steel Sheets

    Hot rolling takes place above the recrystallisation temperature of the steel, which is why the route suits structural and heavy industrial products. Cold rolling runs at ambient temperature. The cold route holds tighter dimensional tolerance and produces a smoother, brighter surface on grades that accept it. Hot-rolled stock carries a scaled surface and wider thickness tolerance and covers the heavier gauges. Cold-rolled material sits in the thinner gauges where flatness and finish matter, such as panelling, enclosures and formed components. The two are not interchangeable in every application. Match the route to the grade, the fabrication sequence, the required finish and the engineering specification.

    Steel Plate Thickness, Dimensions and Finishes

    Sheets, plates and coils come in a spread of thicknesses, widths, lengths and surface conditions that depend on the material and the product form. Confirm thickness tolerance, finished dimensions, surface condition and edge requirements at the quotation stage. Stainless finishes run from mill finishes such as 2B and No. 1 through to other specified surface treatments where the mill offers them. Coil width and sheet size should suit your cutting, forming and fabrication sequence. Settle the required specifications and tolerances in writing before placing the order.

    Applications in Pressure Vessels, Fabrication and Chemical Processing

    Material families map to service conditions. Five application groups account for most of the plate and coil we move.

    Pressure Vessels and Boilers

    Pressure-vessel plate grades are selected against the design code, the operating pressure and the temperature stated in the vessel calculation.

    Structural Fabrication

    Carbon and structural steel grades carry frames, supports, base plates and fabricated components, where strength and weldability matter more than corrosion resistance.

    Chemical Processing

    Stainless steels and selected nickel alloys handle acid, chloride and solvent exposure in tanks, reactors and piping components, subject to concentration and temperature.

    Industrial Machinery

    Steel plate goes into machine components, guards, enclosures, wear surfaces and supporting structures, with thickness driven by load and permitted deflection.

    Marine and Demanding Environments

    Duplex, super duplex and nickel alloys suit seawater and aggressive process duty only where their specified properties match the actual operating environment.

    How to Select the Right Steel Grade for Your Project

    The following checks settle most grade decisions. Work through them before requesting pricing, and the quotation will match the drawing.

    • Define what the component does and the environment it will operate in, because service conditions drive every later decision.

      Identify the properties the part needs, covering strength, corrosion resistance, toughness and performance at the working temperature.Confirm the exact grade and the applicable ASTM, ASME, EN or IS specification before the purchase order is issued.Specify thickness, width, length, coil size and the dimensional tolerances you can accept on each.Account for welding, cutting, machining, bending and forming so the selected grade performs on the shop floor.

      Confirm which material test certificates you need and whether supplementary testing applies under the project specification.

    The lowest-cost material isn’t the right choice if it misses a single technical requirement in the specification.

    Quality Testing, Mill Test Certificates and Inspection

    Traceability starts with material identification. Heat numbers, grade markings and certification tie a plate back to the lot it was rolled from, which matters during inspection and during any later failure investigation. A Mill Test Certificate (MTC) records the chemical composition, mechanical test results, heat number and dimensional data for the supplied material. Buyers checking incoming stock verify chemistry, mechanical properties, dimensions and surface condition against that record. Additional testing or inspection may be required by the applicable standard, the purchase order or the project specification, so state those requirements with the enquiry.

    Steel Sheets, Plates and Coils Supplier in Mumbai and India

    Buyers looking for a steel sheets, plates and coils supplier in India can approach Navgrah Steel for stainless, carbon, alloy, duplex and nickel alloy material, subject to confirmation of the current product range and service coverage. Include the grade, product form, thickness, dimensions, quantity and documentation requirements in your enquiry so the quotation comes back accurate. We work as a steel supplier in Mumbai for fabricators and procurement teams elsewhere. Confirm availability, delivery arrangements and material certification before placing the order. Send your specification through our enquiry page for pricing.

    Frequently Asked Questions

    What is the difference between steel sheets and steel plates?

    Thickness separates the two. Material below roughly 6 mm is classed as sheet, while plate covers 6 mm and above. Coil is supplied as a continuous rolled length rather than cut pieces.

    Which stainless steel grade is better, 304 or 316?

    Neither grade is better in absolute terms. Grade 316 resists chlorides and pitting better because of its molybdenum content, while Grade 304 is sufficient for general atmospheric, indoor and food-contact service.

    What information is needed to order steel plates?

    Navgrah Steel needs the grade, the applicable standard, product form, thickness, width, length, quantity and the certification requirement. Supply a drawing or cutting list where the sizes fall outside standard plate dimensions.

    What is a Mill Test Certificate?

    A Mill Test Certificate is the mill’s record of chemical composition, mechanical test results, heat number and dimensions for a specific lot of material. Inspectors use it to confirm traceability and compliance.

    Can steel plates be supplied in custom dimensions?

    Yes. Navgrah Steel arranges cut-to-size plates against supplied dimensions, subject to the grade, the available plate size and the cutting method the thickness allows.

    Conclusion

    Grade, product form, dimensions and certification have to line up with the application before the material is worth buying. Prepare the specification, the tolerances and the testing requirements first, then ask for pricing. Contact Navgrah Steel, a steel sheets, plates and coils supplier in India, to discuss your sheet, plate and coil requirement.

Navgraha Steel & Engineering Company
Krishvi Escape, No. A208, 2ND Floor,
A Wing, Sitaram Poddar Marg,
Near Vinay Health Home, Fanaswadi, Bhuleshwar, Mumbai- 400002

Copyright © 2026 Navgraha Steel & Engineering Company.

Copyright © 2026 Navgraha Steel & Engineering Company.

Navgraha Steel & Engineering Company
Krishvi Escape, No. A208, 2ND Floor,
A Wing, Sitaram Poddar Marg,
Near Vinay Health Home, Fanaswadi, Bhuleshwar, Mumbai- 400002

Company

Material

Products

Quick Contact

Navgrah Steel: Steel Sheets, Plates and Coils Supplier in India

by Nikhil Doshi time to read: 6 min
0